View 66163-107_1200997.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

66163
REVISION C
SINGLE CHANNEL OPTOCOUPLERS DIRECT REPLACEMENT FOR 3C91C
Mii
OPTOELECTRONIC PRODUCTS DIVISION
12/29/00
Features: * * * * * High Reliability Base lead eliminated for improved noise immunity Rugged package Stability over wide temperature +500V electrical isolation
Applications: * * * * * Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control
DESCRIPTION The 66163 contains a gallium arsenide infrared LED optically coupled to a silicon planar phototransistor. The optocoupler is built on a TO-46 header. The collector of the phototransistor is electrically connected to the case. This optocoupler is capable of transmitting signals between two galvanic sources. The potential difference between transmitter and receiver should not go over the maximum isolation voltage. The internal base connection has been eliminated for improved noise immunity. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage...........................................................................................................................................................500V Emitter-Collector Voltage............................................................................................................................................................5V Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ............................60V Reverse Input Voltage ...............................................................................................................................................................7V Input Diode Continuous Forward Current at (or below) 65C Free-Air Temperature (see note 1) .....................................50mA Peak Forward Input Current (Value applies for tw < 1s, PRR < 300 pps) .......................................................................500mA Continuous Collector Current ................................................................................................................................................50mA Continuous Transistor Power Dissipation at (or below) 25C Free-Air Temperature (see Note 2) .................................230mW Storage Temperature.......................................................................................................................................... -65C to +150C Operating Free-Air Temperature Range ............................................................................................................. -55C to +125C Lead Solder Temperature (10 seconds max.) .................................................................................................................... 260C Notes: 1. Derate linearly to 125C free-air temperature at the rate of 0.67 mA/C above 65C. 2. Derate linearly to 125C free-air temperature at the rate of 2.3 mW/C. Package Dimensions Schematic Diagram
4 LEADS
0.019O (0.48) 0.016O (0.41)
0.230O (5.84) 0.209O (5.31)
EMITTER COLLECTOR
2 3
O0.100[2.54] ANODE
0.195O (4.95) 0.178O (4.52)
4
1
0.048 [1.22] 0.028 [0.71]
45
CATHODE
0.030 (0.76) MAX
0.210 [5.34] 0.170 [4.32] 0.50 [12.70] MIN
0.046 [1.17] 0.036 [0.91]
DIMENSIONS ARE IN INCHES (MILLIMETERS)
NOTE: ANODE ELECTRICALLY CONNECTED TO CASE
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
3 - 44
66163
REVISION C 12/29/00
SINGLE CHANNEL OPTOCOUPLER (Direct Replacement for 3C91C)
ELECTRICAL CHARACTERISTICS
TA = 25C unless otherwise specified.
PARAMETER
Input Diode Static Reverse Current Input Diode Static Forward Voltage Input Diode Static Forward Voltage Reverse Breakdown Voltage Input Diode Capacitance
SYMBOL
IR VF VF BVR CIN
MIN
TYP
MAX
1
UNITS
A V V V pF
TEST CONDITIONS
VR = 3V IF = 2mA IF = 50mA IR = 100A V = 0V, f = 1MHz
1.15 1.3 7 12 25
1.2 1.5
OUTPUT TRANSISTOR
TA = 25C unless otherwise specified.
PARAMETER
Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Dark Current
SYMBOL
V(BR)CEO V(BR)ECO ICEO1 ICEO2
MIN
50 7
TYP
MAX
UNITS
V V
TEST CONDITIONS
IC = 1mA, IB = 0, IF = 0 IC = 0mA, IE = 10A, IF = 0 VCE = 50V, IF = 0mA VCE = 5V, IF = 0mA
60 10
nA nA
COUPLED CHARACTERISTICS
TA = 25C unless otherwise specified.
PARAMETER
On State Collector Current On State Collector Current On State Collector Current On State Collector Current Collector-Emitter Saturation Voltage Isolation Resistance Input to Output Capacitance Delay Time Storage Time Rise Time Fall Time -55C -X07 -107
SYMBOL
IC(ON) IC(ON) IC(ON) IC(ON) VCE(SAT) RISO CIO td ts tr tf
MIN
4 3 2 20
TYP
MAX
20
UNITS
mA mA mA mA
TEST CONDITIONS
VCE = 5V, IF = 10mA VCE = 0.4V, IF = 10mA VCE = 5V, IF = 10mA VCE = 5V, IF = 10mA IF = 50mA, IC = 10mA VIN-OUT = 500V f = 1MHz VCE = 5V, IF = 2mA, RL = 100 VCE = 5V, IF = 2mA, RL = 100 VCE = 5V, IF = 2mA, RL = 100 VCE = 5V, IF = 2mA, RL = 100
0.4 10
9
V
2 2 0.2 3 4
2.5 4 0.5 5 5
pF
s s s s
RECOMMENDED OPERATING CONDITIONS:
PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage Operating Temperature PART NUMBER 66163-001 66163-011 66163-101 66163-017 66163-107 SYMBOL IFL IFH VCE TA MIN 0 2 5 -55 MAX 1 10 50 125 UNITS
A
mA V
C
SELECTION GUIDE
PART DESCRIPTION Single Channel optocoupler, commercial (0 to 70C) Single Channel optocoupler full military operating temperature range Single Channel optocoupler tested over full military temperature range with 100% device screening Single Channel optocoupler full military operating temperature range w/200% CTR Single Channel optocoupler tested over full military temperature range with 100% device screening w/200% CTR
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
3 - 45

▲Up To Search▲

Price & Availability of 66163-107

	To Download 66163-107 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .